PL DE EN

PDS ZM, profile

, REF. B7696ANODA
Profil led Lipod - Kluś Design
Akcesoria:
Profil led Lesto KluśPUSZ PRET ZM fastener, REF.42250
Profil led Lesto KluśPUSZ LIN ZM fastener, REF.42256
Profil led Lesto KluśUCHO ZM eye hanger, REF.42512
Profil led Lesto KluśKA-COM cover frosted, REF.17121
Profil led Lesto KluśKA-BIS Cover transparent, REF.17072
Profil led Lesto KluśKA-BIS Cover frosted, REF.17071
Profil led Lesto KluśHS Cover frosted, certified, REF.1369
Profil led Lesto KluśHS Cover transparent, certified, REF.1370
Profil led Lesto KluśLIGER-V1Cover frosted, LINE OF LIGHT, REF.17037
Profil led Lesto Kluś K Cover transparent, REF.1548
Profil led Lesto KluśK Cover frosted, REF.1547
Profil led Lesto KluśGP surface spring, REF.00293
Profil led Lesto KluśZMPION-135 Connector, REF.42719
Profil led Lesto KluśZMPION-90 Connector, REF.42718
Profil led Lesto KluśZM-90 Connector, REF.42716
Profil led Lesto KluśZM-180 Connector, REF.42717
Profil led Lesto KluśZM-135 Connector, REF.42720
Profil led Lesto KluśPDS ZM End Cap, REF.24145
pds_zm_album-1.jpg1album_psd_zm355.png2album_psd_zm33.png3album_psd_zm34.png4album_psd_zm222.png5album_psd_zm1.png6

SMOOTH SIDE SURFACES

 

LINE OF LIGHT

 

PDS-ZM  is a small-sized extrusion designed for universal applications.

 

NOTE FOR SEALED FIXTURES!
Sealed lighting fixtures that are used in applications which are exposed to strong sunlight should be used in conjunction with a day/night switch. The switch will turn the fixtures off during the day, when their light would not be visible. This prevents overheating and destruction of the LED diodes. Examples of sunny places include rooftops, building elevations, exposed balconies, terraces etc. 

 

 

description

Side surfaces of the extrusion are smooth, without heatsinks. There is a so-called ‘small lock’ on top of the extrusion which enables you to connect extrusions into extended polygonal lighting fixtures.

 

Features:

PDS ZM extrusion is made of high quality aluminum. The light source in this case is a single 10,8 mm max. wide LED strip. A single line of light can be obtained with the use of densely spaced LEDs and a frosted HS (min. 140 LED/m) or LIGER cover (min. 120LED/m). It is possible to build a highly tight LED fixture with ingress protection rate of IP67.

 

Mounting:

ZM connectors, embedded in the edge of the extrusion, enable you to connect individual parts. The suspension of the fixture is performed using fasteners that match a small lock. You can also apply GP mounting springs to surface mount the fixture on drywall. See a full range of connectors together with a complete offer of fasteners and mounting springs in ACCESSORIES. 

technical drawing

 

download PDF (data sheet, manual, brochure)