PL DE EN

TE-4 KPL. Mounting profile

, REF. q18019WNA
Profil led Lipod - Kluś Design
Akcesoria:
Profil led Lesto KluśTE-4 End Cap, REF.24101
Profil led Lesto KluśPDS 4 - K PROFILE, REF.B3776ANODA
Profil led Lesto KluśPDS 4 - ALU PROFILE, REF.B1718ANODA
te-4_rozstrz-1-1.jpg1te4_animka_700x630-1.gif2PDS4ALU2_album-1.png3PDS4ALU2_album2-1.png4

MOUNTING PROFILE

description

 

  1 m (standard)
  2 m (standard)
  3 m*
  3 – 6 m**

  non anodized

 18019WNA

*    Available by arrangement with sales department of KLUŚ
**  Special order

 

TE-4 PROFILE is used to build precise slots (grooves) in the surfaces of walls and drywall ceilings in order to fit lighting fixtures made with PDS4-ALU and PDS4-K profiles.
The wide flange of the TE-4 profile is designed to be covered in standard materials for joining and finishing drywall surfaces.
PDS4-ALU and PDS4-K  are mounted by "click". This allows easy installation of lighting fixtures and non-invasive removal of fixtures for service purposes.

 

Mounting:
The TE-4 KPL. profile can be mounted in pre made slots of drywall structures using gypsum adhesive (GS 20  CECOL) or mounting adhesive.
After the adhesive dries, cover the aluminum flanges thinly with a suitable adhesive, put on the reinforcing mesh and putty. When dry, sand the putty carefully so that the edges of the profile are visible. Such a prepared surface fitted with the TE-4 profile can be finished by painting.

 

All finishing must be carried out with the profile liner in place protecting its interior against soiling. After completion of these works, remove the liner, remove any remnants of putty or paint, check  the elastic mounting cord for damages and gently push the fixture into place.

 

TE-4 profiles are sold with an integrated elastic mounting cord, and a liner protecting the mounting chamber from excessive dirt.

 

NOTE! The profile fitted in a wall, ceiling, etc. must maintain a straight line. Excessive bending of the profile to the curvature of the surface in which it is fitted will prevent the mounting of the fixture.

technical drawing